Glass Laminator Series

The production process of EVA laminated glass is similar to that of ordinary laminated glass, but there are differences in film selection and some processes. The main process is as follows:



Original glass preparation



-Film selection: Select high-quality glass raw materials with high flatness and no obvious defects, and determine the type of glass according to actual needs, such as float glass, ultra white glass, etc.

-Cutting: Use a glass cutting machine to cut the original glass into the required size and shape, with cutting accuracy controlled within a small range to ensure the accuracy of subsequent processing.



Glass cleaning and drying



-Cleaning: Place the cut glass into a glass cleaning machine and use methods such as spraying and brushing to remove dust, oil, and other impurities from the glass surface using clean water and specialized cleaning agents, ensuring the cleanliness of the glass surface.

-Drying: After cleaning, the glass is dried by hot air or natural drying to completely dry the surface of the glass and avoid moisture residue affecting the bonding between the EVA film and the glass.



EVA film preparation



-Film selection: Based on the usage requirements and performance characteristics of laminated glass, select EVA (ethylene vinyl acetate copolymer) film with appropriate thickness and performance. EVA film should have good transparency, adhesion, and weather resistance.

-Film cutting: Use cutting equipment to cut EVA film into a shape that matches the size of the glass. When cutting, pay attention to ensuring that the edges of the film are neat, without burrs or damage.



Lamination



-On a clean workbench, place a piece of glass first, lay the cut EVA film flat on the glass, ensure that the film is aligned with the edge of the glass, and then cover another piece of glass on the EVA film to form a sandwich structure. During the lamination process, it is important to avoid the formation of bubbles and wrinkles between the film and glass as much as possible.





High temperature curing



-Place the sealed laminated glass into the laminated glass equipment and crosslink the EVA film at a high temperature to achieve complete curing, thereby firmly bonding the two pieces of glass. The curing temperature is generally around 130-150 ℃, and the curing time depends on the thickness of the glass and film, usually ranging from tens of minutes to several hours.



Cooling and testing



-Cooling: The cured laminated glass is taken out of the curing equipment and naturally cooled to room temperature. During the cooling process, it is necessary to avoid external impact or rapid temperature changes on the glass to avoid affecting product quality.

-Testing: Conduct a comprehensive inspection of the cooled EVA laminated glass, including visual inspection, to check for defects such as bubbles, impurities, and delamination; Measure the dimensions to ensure that the glass meets the standard requirements; Performance testing to check whether the indicators such as light transmittance, impact resistance, and bonding strength meet the specified standards.



Packaging and Storage



-Packaging: Qualified EVA laminated glass is packaged with protective film, cardboard boxes, or wooden crates to protect the glass from damage during transportation and storage.

-Storage: Store the packaged laminated glass in the warehouse, classify it according to specifications and batches, take measures to prevent moisture and dust, and wait for shipment.

In a significant milestone for our collaboration, our customer recently received a full batch of advanced glass processing equipment and materials, delivered directly to their factory. The shipment, which included an Automatic Glass Laminating Machine, a high-precision CNC Glass Cutting Machine, Double Glass insulating units materials, and premium EVA film, arrived safely in three containers.



Our team coordinated the entire unloading process seamlessly, ensuring all machinery and materials were handled with care and efficiency. The successful logistics operation highlights our capability to manage large-scale, multi-product orders and deliver them ready for installation and production.



The client expressed great satisfaction with the organization of the delivery and the quality of the products supplied. This delivery marks a crucial step in expanding their production capabilities, enabling them to offer higher quality and more diverse glass products. We are proud to be a trusted partner in providing comprehensive solutions for the glass industry.

Front Sealing Head Sealing Robot: A Superior Choice for Gradual Double Glazing Glass

1. Introduction

In the contemporary construction and manufacturing industries, double glazing glass—renowned for its exceptional thermal insulation, soundproofing, and energy-saving properties—has become an indispensable material for high-performance buildings and vehicles. Also referred to as insulating glass, it comprises two or more glass panes separated by a spacer frame filled with desiccant, creating a sealed cavity that minimizes heat transfer and sound transmission . However, the efficacy of double glazing glass is inherently dependent on the quality of its sealing process. A precise, consistent seal not only prevents moisture penetration and gas leakage but also ensures the material’s long-term structural integrity and performance stability. As the demand for gradual double glazing glass—characterized by varying thicknesses, multi-cavity designs, and specialized coatings—continues to grow, traditional manual sealing methods and conventional equipment have increasingly struggled to meet the stringent requirements of modern production. In this context, the front sealing head sealing robot emerges as a transformative solution, integrating advanced automation, precision engineering, and adaptive technology to redefine the standards of double glazing sealing. This article explores the technical advantages, functional capabilities, and industry impact of front sealing head sealing robots, demonstrating why they are the optimal choice for gradual double glazing glass processing.

2. The Critical Role of Sealing in Gradual Double Glazing Glass

2.1 Key Requirements for Sealing Gradual Double Glazing

Gradual double glazing glass presents unique challenges that elevate the complexity of the sealing process. Unlike standard double glazing, gradual variants often feature variable pane thicknesses, multi-layered cavities (such as three-layer insulating glass), and specialized coatings (e.g., low-emissivity or double-silver coatings) . These characteristics impose strict demands on the sealing process:


Precision and Consistency: The sealant must be applied uniformly across irregular surfaces and varying gaps, ensuring no bubbles, gaps, or excess overflow. For multi-cavity designs, each cavity requires independent, accurate sealing to maintain thermal and acoustic insulation .
Material Compatibility: Sealing agents must adhere effectively to coated glass surfaces without damaging the film or compromising its low-radiation properties. This requires precise control of application pressure, temperature, and sealant composition .
Efficiency and Scalability: With the expansion of production volumes, the sealing process must balance high speed with uncompromised quality, avoiding bottlenecks in mass production while accommodating small-batch, customized orders .
Sustainability: Minimizing sealant waste and reducing volatile organic compound (VOC) emissions are critical for environmental compliance and cost optimization .


2.2 Limitations of Traditional Sealing Methods

Traditional sealing approaches, including manual application and semi-automatic equipment, fail to address these requirements adequately. Manual sealing is inherently prone to human error, resulting in inconsistent sealant distribution, uneven thickness, and frequent defects such as bubbles or gaps . Workers cannot replicate the same pressure, speed, or precision across multiple units, leading to variations in product quality that compromise the performance of gradual double glazing glass. Additionally, manual sealing is labor-intensive, time-consuming, and exposes workers to hazardous fumes and repetitive motion injuries, posing significant safety and productivity risks . Conventional semi-automatic equipment, while more consistent than manual methods, lacks the adaptability to handle gradual double glazing’s variable specifications. It often requires time-consuming adjustments for different glass thicknesses or cavity designs, leading to production downtime and inefficiency . These limitations highlight the need for a fully automated, adaptive solution that can meet the dynamic demands of gradual double glazing glass processing.

3. Technical Advantages of Front Sealing Head Sealing Robots

Front sealing head sealing robots address the shortcomings of traditional methods through a combination of advanced sensors, precision control systems, and adaptive mechanical design. Their technical superiority is evident in the following key aspects:

3.1 High-Precision Sensing and Adaptive Control

Modern front sealing head sealing robots are equipped with high-resolution photoelectric switch sensors and depth detection devices that automatically measure glass thickness, cavity depth, and spacer frame dimensions . This real-time data is processed by a sophisticated control system—typically a Siemens PLC or large-screen touchscreen human-machine interface—that adjusts application parameters (e.g., sealant flow rate, nozzle position, and movement speed) in real time . For example, the LJTJ2540 model from LIJIANG Glass uses servo motors and high-precision racks to achieve automated transmission, ensuring glue coating accuracy even for glass with misalignment errors within a certain range . The robot’s front sealing head features a unique floating structure that maintains close contact with the glass surface without causing damage, adapting to irregularities and ensuring uniform sealant application . This adaptive control capability is particularly critical for gradual double glazing glass, as it allows the robot to handle variable thicknesses (ranging from 6mm to 20mm or more) and multi-cavity designs without manual intervention . For three-layer insulating glass, the robot can automatically adjust the sealing head angle after completing the first cavity, ensuring precise sealing of the second cavity with consistent quality .

3.2 Efficient and Cost-Effective Sealing

Front sealing head sealing robots significantly enhance production efficiency through automation and process optimization. Equipped with automatic glue replenishing functions and dual-channel sealing gasket structures, they eliminate the need for manual refilling and reduce sealant overflow—a common issue with two-component glue barrels . The hydraulic pressure control system ensures quantitative supply of both component A (white glue) and component B (black glue), maintaining optimal mixing ratios and minimizing waste . This not only reduces material costs but also improves the curing quality of the sealant, enhancing the durability of the double glazing glass . Additionally, the robots’ high-speed transmission systems—combining multi-row roller chains and V-belts—ensure smooth glass movement during sealing, reducing cycle times while maintaining precision . The LJTJ2030 model, for instance, can process glass sizes ranging from 400×280mm to 2000×3000mm with consistent sealing standards, achieving high production efficiency while lowering labor intensity . For manufacturers, this translates to increased throughput, reduced operational costs, and improved scalability—whether for large-scale mass production or small-batch customized orders .

3.3 Enhanced Safety and Sustainability

Safety and sustainability are core advantages of front sealing head sealing robots. By automating repetitive and hazardous tasks, they eliminate workers’ exposure to sealant fumes, chemical irritants, and repetitive motion injuries . The robots’ enclosed design and safety interlocks further reduce the risk of accidents in the production environment. From an environmental perspective, the precise control of sealant application minimizes waste, reducing VOC emissions and the overall environmental footprint of the production process . The automatic adjustment of glue output based on real-time sensor data ensures that only the required amount of sealant is used, avoiding excess that would otherwise be discarded . Additionally, many front sealing head robots are compatible with eco-friendly sealant materials, further aligning with global sustainability goals .

3.4 Versatility and Compatibility with Advanced Designs

Front sealing head sealing robots are highly versatile, capable of adapting to a wide range of gradual double glazing configurations. Their programmability allows for the storage of multiple part-specific programs, enabling seamless switching between different glass sizes, cavity designs, and coating types . For example, the 3D head robotic sealer from Sames supports three separate nozzles with adjustable orientations, allowing it to access hard-to-reach areas and apply flat, uniform seals on complex geometries . Kawasaki’s BU series robots, with their 7-axis design and long reach (up to 2887.5mm), are ideal for sealing large or irregularly shaped double glazing units, such as those used in automotive or aerospace applications . Moreover, these robots are compatible with various sealant types, including polysulfide, silicone, and butyl rubber, ensuring compatibility with the diverse material requirements of gradual double glazing glass . Whether processing standard double glazing, three-layer insulating glass, or coated gradual variants, front sealing head robots deliver consistent, high-quality results.

4. Real-World Applications and Industry Impact

The adoption of front sealing head sealing robots has already made a significant impact across key industries, including construction, automotive, and aerospace. In the construction sector, where energy efficiency and durability are paramount, these robots are used to produce high-performance gradual double glazing for commercial buildings, residential complexes, and green infrastructure . For example, manufacturers using LIJIANG Glass’s LJTJ2540 and LJTJ2030 robots have reported improved sealing consistency, reduced product failure rates, and enhanced compliance with international energy efficiency standards . In the automotive industry, front sealing head robots are employed to seal windshields, side windows, and sunroofs—often gradual double glazing with curved surfaces and variable thicknesses. Robots like the ABB IRB 6640 and Fanuc R-2000 series ensure precise, uniform seals that withstand extreme temperatures, vibrations, and moisture, improving vehicle safety and comfort .

Refurbished front sealing head robots have also emerged as a cost-effective option for small and medium-sized enterprises (SMEs), offering the same precision and efficiency as new equipment at a lower investment . Companies like Global Robots supply refurbished models from top brands (e.g., ABB, Fanuc, Kuka) that undergo rigorous testing to ensure reliability, making advanced sealing technology accessible to a broader range of manufacturers . This democratization of automation has accelerated the adoption of front sealing head robots, driving innovation and competitiveness in the double glazing industry.

5. Conclusion

As the demand for gradual double glazing glass continues to rise, the need for a precise, efficient, and adaptive sealing solution has never been greater. Front sealing head sealing robots address this need by integrating high-precision sensing, adaptive control, and automated technology to overcome the limitations of traditional sealing methods. Their ability to handle variable thicknesses, multi-cavity designs, and specialized coatings—while maintaining consistency, efficiency, and sustainability—makes them the superior choice for modern double glazing production. From enhancing product quality and reducing costs to improving workplace safety and environmental compliance, these robots deliver multifaceted value that drives industry progress. As technology advances, front sealing head sealing robots will continue to evolve, incorporating artificial intelligence, machine learning, and advanced materials to meet the ever-changing demands of gradual double glazing glass processing. For manufacturers committed to excellence, investing in a front sealing head sealing robot is not just a practical decision—it is a strategic investment in the future of high-performance double glazing.





This article comprehensively covers the technical, operational, and industry-specific aspects of front sealing head sealing robots for gradual double glazing glass. If you need to emphasize specific applications (e.g., automotive vs. construction), add technical data comparisons, or include case studies from particular manufacturers, feel free to provide additional details. I can also refine the content to align with specific industry standards or target audiences (e.g., engineering professionals, production managers).

Manual: Aluminium Bar Bending Machine

1. Foreword

This manual is compiled to specify the operation specifications, safety precautions, maintenance requirements and troubleshooting methods of the Aluminium Bar Bending Machine, aiming to guide operators to use the equipment correctly, ensure the bending accuracy of aluminium bars, extend the service life of the machine, and eliminate potential safety hazards in the operation process. The Aluminium Bar Bending Machine is a special equipment widely used in insulating glass production, door and window manufacturing, architectural decoration and other industries, which is used for bending and forming various specifications of aluminium spacer bars. All operators must read this manual carefully, receive professional training and pass the assessment before operating the equipment. Any operation in violation of this manual may lead to equipment damage, product quality defects or personal safety accidents. This manual applies to all conventional models of Aluminium Bar Bending Machines, and for special customized models, the supplementary instructions provided by the manufacturer shall be referred to additionally.

2. Scope of Application

This manual is applicable to the operation, daily maintenance, routine inspection and fault handling of vertical and horizontal Aluminium Bar Bending Machines for insulating glass spacer bars, including but not limited to single-head bending machines, double-head bending machines and CNC automatic Aluminium Bar Bending Machines. It covers the whole process from equipment startup preparation, aluminium bar loading, parameter setting, bending operation to shutdown and post-operation treatment. The aluminium bars applicable to this equipment include hollow glass aluminium spacer bars with specifications of 6A, 9A, 12A, 15A, 18A, 20A, etc., and the bending angle ranges from 90° to 180°, which can meet the bending forming requirements of rectangular, square and special-shaped aluminium frames for insulating glass.

3. Equipment Overview

3.1 Basic Structure

The Aluminium Bar Bending Machine is mainly composed of frame system, bending execution system, clamping and positioning system, control system, feeding and discharging system, and safety protection system.


Frame System: It is the main bearing structure of the equipment, made of high-strength steel plate welding or profile assembly, with high rigidity and stability, to ensure that the equipment does not deform during the bending process.
Bending Execution System: The core working part of the equipment, including bending die, bending shaft, driving motor (servo motor or hydraulic motor), transmission mechanism, etc., which completes the bending action of aluminium bars through the rotation of the die and the driving of the power system.
Clamping and Positioning System: Composed of pneumatic clamping cylinder, positioning baffle, pressure plate, etc., it is used to fix the aluminium bar firmly during bending, prevent displacement and deflection, and ensure the bending accuracy.
Control System: Including touch screen, operation button panel, PLC controller, servo driver, etc., which realizes the setting of bending parameters (angle, length, speed), automatic operation control and fault alarm display.
Feeding and Discharging System: Consisting of feeding roller table, discharging bracket, conveying roller, etc., it facilitates the loading of raw aluminium bars and the unloading of formed aluminium frames, improving operation efficiency.
Safety Protection System: Including emergency stop button, safety grating, protective cover, overload protection device, etc., to prevent personal injury and equipment damage caused by misoperation.


3.2 Working Principle

The Aluminium Bar Bending Machine takes electric or hydraulic as the driving power, and the PLC controller sends out control instructions according to the set parameters. The aluminium bar is fixed by the clamping mechanism, and the bending die is driven by the servo/hydraulic system to rotate at a set angle, so as to realize the plastic deformation of the aluminium bar at the specified position and complete the bending forming. The equipment adopts precision positioning and closed-loop control technology, which can automatically compensate for the springback of aluminium bars, ensure the consistency of bending angle and size, and meet the assembly requirements of insulating glass.

3.3 Technical Parameters

The main technical parameters of conventional Aluminium Bar Bending Machines are as follows (for reference only, subject to the actual nameplate of the equipment):


Applicable aluminium bar width: 6mm-20mm
Applicable aluminium bar height: 5mm-30mm
Bending angle range: 0°-180° (stepless adjustment)
Bending accuracy: ±0.5°
Maximum bending length: 6000mm
Driving mode: Servo motor drive / hydraulic drive
Working air pressure: 0.4-0.6MPa
Power supply: 380V 50Hz three-phase four-wire
Overall dimension: (length×width×height) 2500mm×800mm×1500mm (conventional model)
Weight: About 800kg-1200kg


4. Pre-operation Preparation

4.1 Personnel Preparation


Operators must be over 18 years old, in good health, and have received special equipment operation training, familiar with the structure, performance, operating procedures and safety precautions of the Aluminium Bar Bending Machine, and hold a post certificate before taking up their posts.
Operators must wear standard labor protection equipment, including anti-pinch gloves, anti-static work clothes, safety shoes, and protective goggles (when cutting or processing special aluminium bars). It is forbidden to wear loose clothes, scarves, jewelry, or have long hair unbound, so as to avoid being involved in the rotating parts of the equipment.
Non-operators are strictly prohibited from entering the equipment working area, and obvious warning signs such as "No Unauthorized Operation" and "Danger, Keep Away" shall be set up at the operation site.


4.2 Equipment Inspection


Appearance and Structure Inspection: Check the appearance of the equipment for deformation, damage or loose parts, check the welding part of the frame for cracks, and check the fastening bolts of each component (such as die, clamping cylinder, motor base) for looseness, and tighten them in time if any.
Power and Air Supply Inspection: Check whether the power cord, plug and socket of the equipment are intact, whether the wiring is firm, and whether the leakage protector is normal. For pneumatic clamping models, check the air compressor, air pipeline and air filter for air leakage, blockage or water accumulation, and adjust the air pressure to 0.4-0.6MPa. Drain the water in the air storage tank and filter regularly to prevent moisture from entering the pneumatic components.
Mechanical Transmission Inspection: Check the bending die, transmission gear, chain, belt and other transmission parts for wear, deformation or damage, check whether the lubrication is sufficient, and add lubricating oil or grease according to the regulations if necessary. Manually rotate the bending shaft to check whether it rotates smoothly without jamming or abnormal noise.
Control System Inspection: Turn on the power supply of the equipment, check whether the touch screen and operation panel are lighted normally, whether the display data is accurate, and test the functions of start, stop, emergency stop, parameter adjustment and other buttons to ensure that all control functions are sensitive and effective. Check the PLC controller and servo driver for fault alarms, and eliminate the alarms in time if any.
Die and Accessory Inspection: Select the bending die matching the specification of the aluminium bar, check the die for wear, cracks or burrs, and replace it in time if it is damaged. Check the positioning baffle, pressure plate and clamping block for wear or deformation, and adjust or replace them to ensure the positioning accuracy.


4.3 Material and Tool Preparation


Select qualified aluminium spacer bars that meet the production requirements, check the appearance of aluminium bars for scratches, deformation, oxidation or impurities, check the dimensional accuracy (width, height, thickness), and prohibit the use of unqualified aluminium bars that do not meet the bending requirements.
Prepare auxiliary tools, such as hexagon wrench, screwdriver, torque wrench, cleaning cloth, lubricating oil, measuring tools (angle ruler, tape measure, vernier caliper), etc., to ensure that the tools are complete and intact.
Prepare the product drawings or process documents, confirm the bending parameters of aluminium bars (bending angle, side length, quantity, etc.), and input the parameters into the control system in advance for trial bending verification.


5. Standard Operation Procedures

5.1 Equipment Startup


Turn on the main power switch of the equipment, and then turn on the power supply of the control system, PLC and touch screen in sequence. Wait for the system to start and self-check, and confirm that there is no fault alarm before proceeding to the next operation.
For hydraulic drive models, turn on the hydraulic pump motor, run it idly for 3-5 minutes, check the hydraulic system for oil leakage, abnormal noise or overheating, and confirm that the hydraulic pressure is within the normal range.
For pneumatic models, open the air supply valve, check the air pressure gauge to ensure that the air pressure is stable at 0.4-0.6MPa, and test the action of the clamping cylinder to ensure that the clamping and loosening actions are flexible and in place.


5.2 Parameter Setting


Enter the parameter setting interface of the touch screen, input the bending parameters according to the product process requirements, including aluminium bar specification, bending angle, left and right side lengths, bending speed, clamping pressure, etc.
Set the springback compensation value according to the material characteristics of the aluminium bar (the springback of aluminium bars is generally 1°-3°, which can be adjusted according to the actual trial bending results).
For batch production, store the set parameters in the system program, name the program according to the product model, and call it directly during subsequent production to improve efficiency.
After setting the parameters, double-check to confirm that the input data is correct, and then save the parameters and exit the setting interface.


5.3 Aluminium Bar Loading and Positioning


Place the qualified aluminium bar flat on the feeding roller table, push it to the positioning baffle of the equipment, and adjust the position of the positioning baffle to ensure that the bending point of the aluminium bar is aligned with the center of the bending die.
Start the clamping mechanism (manual or automatic), and the clamping cylinder drives the pressure plate to press the aluminium bar firmly to prevent the aluminium bar from moving or rotating during the bending process. The clamping pressure should be appropriate, not too large to deform the aluminium bar, nor too small to cause insufficient clamping.
Use a measuring tool to recheck the positioning size of the aluminium bar, confirm that the bending position and length meet the process requirements, and then proceed to the bending operation.


5.4 Bending Operation

5.4.1 Manual Bending Mode


Select the manual operation mode on the control panel, and operate the manual button or joystick to control the bending die to rotate slowly, and observe the bending state of the aluminium bar in real time.
When the bending angle reaches the set value, the equipment will automatically stop or stop manually, and keep the pressure for 1-2 seconds to eliminate the springback of the aluminium bar.
Operate the loosening button to release the clamping mechanism, take out the bent aluminium bar, and use an angle ruler and tape measure to check the bending angle and size accuracy. If the accuracy is unqualified, readjust the springback compensation value and parameters for trial bending again.


5.4.2 Automatic Bending Mode


Select the automatic operation mode on the touch screen, call the pre-stored product program, and confirm that the parameters are correct.
Press the automatic start button, the equipment will automatically complete the actions of clamping, bending, pressure maintaining, loosening and resetting in sequence according to the set program.
During the automatic operation, the operator shall stand in the safe area outside the safety grating, observe the operation state of the equipment in real time, and pay attention to whether there is abnormal noise, aluminium bar deformation or equipment failure.
After the bending of a single aluminium bar is completed, the equipment will automatically reset and wait for the next feeding. For batch production, repeat the loading and start operation until the production task is completed.


5.5 Trial Bending and Batch Production


Before formal batch production, conduct trial bending on 2-3 aluminium bars, check the bending angle, side length, flatness and appearance quality of the formed aluminium frame, and confirm that all indicators meet the process standards.
If the trial bending product is unqualified, analyze the causes (such as parameter setting error, die mismatch, positioning deviation, aluminium bar quality problem), adjust the parameters or replace the accessories in time, and conduct trial bending again until the product is qualified.
After the trial bending is qualified, carry out formal batch production, and conduct random inspection on the formed products at regular intervals (every 50-100 pieces) to ensure the stability of product quality.


5.6 Equipment Shutdown


After completing the production task, press the stop button to stop the operation of the equipment, and reset the bending die and clamping mechanism to the initial position.
For hydraulic drive models, turn off the hydraulic pump motor first, and then turn off the main power supply; for pneumatic models, close the air supply valve first, and then turn off the power supply.
Clean the residual aluminium chips, dust and impurities on the equipment surface, roller table and die, wipe the equipment with a clean cloth, and apply anti-rust oil on the die and metal parts if necessary.
Hang the "Shutdown for Maintenance" or "No Operation" warning sign on the operation panel, and record the production data, operation time and equipment status in the equipment operation log.


6. Safety Precautions

6.1 Basic Safety Rules


It is strictly forbidden to operate the equipment with diseases, fatigue, drunk or distracted mental state, so as to avoid misoperation.
During the operation of the equipment, it is forbidden to extend hands, arms or any parts of the body into the bending working area, and it is forbidden to touch the rotating die, transmission parts and high-temperature components (hydraulic motor, servo motor) with bare hands.
Do not place tools, aluminium bars or other sundries on the equipment frame, control panel and safety protection device to avoid affecting the equipment operation or causing safety accidents.
The equipment must be reliably grounded to prevent electric shock accidents. Do not disassemble or modify the electrical components, control circuit and mechanical structure of the equipment without authorization.
In case of power failure or air failure during operation, immediately press the emergency stop button, cut off the power supply and air supply, and wait for the power supply and air supply to return to normal before restarting the operation after inspection.


6.2 Special Operation Safety


When replacing the bending die, the equipment must be completely shut down, the power supply and air supply/hydraulic supply must be cut off, and the operation can be carried out only after the die is completely stopped. Use special tools to disassemble and assemble the die to avoid injury caused by die falling.
When bending special-shaped or ultra-long aluminium bars, add auxiliary support brackets to prevent the aluminium bars from deforming or swinging during the bending process, and arrange special personnel to assist in feeding and discharging.
When the equipment is running with overload or abnormal noise, immediately press the emergency stop button, cut off the power supply, check the cause of the fault, and it is forbidden to continue operation with fault.
The safety grating, protective cover and emergency stop button of the equipment shall not be dismantled or shielded at will, and regular inspection shall be carried out to ensure their effectiveness.


6.3 Emergency Handling


In case of personal injury (such as pinch, scald, electric shock), immediately cut off the power supply and air supply, carry out first aid measures, and send to the hospital for treatment in time.
In case of equipment failure (such as die jamming, hydraulic oil leakage, motor overheating), press the emergency stop button immediately, stop the operation, record the fault phenomenon, and notify the professional maintenance personnel for repair.
In case of fire caused by electrical short circuit or hydraulic oil combustion, immediately cut off the power supply, use dry powder fire extinguisher to put out the fire, and it is forbidden to use water to put out the electrical fire.


7. Equipment Maintenance and Upkeep

7.1 Daily Maintenance (Once per Shift)


Clean the equipment surface, die, roller table and working area, remove aluminium chips, dust and impurities, and keep the equipment clean.
Check the fastening of bolts, nuts and connectors of each component, and tighten them in time if loose.
Check the air pressure, hydraulic pressure and lubrication state of the equipment, add lubricating oil or grease to the transmission parts (bearing, gear, chain) according to the regulations, and check the hydraulic oil level and oil quality.
Test the functions of emergency stop button, safety grating and control buttons to ensure they are normal.
Record the daily maintenance situation in the equipment maintenance log.


7.2 Weekly Maintenance (Once a Week)


Thoroughly clean the inside of the equipment, including the hydraulic oil tank, air filter, control cabinet, remove dust and impurities, and check the wiring in the control cabinet for looseness.
Check the wear of bending die, clamping block, positioning baffle and transmission parts, and replace the seriously worn parts in time.
Drain the water and impurities in the air storage tank, air filter and hydraulic oil tank, and check the hydraulic oil for deterioration or pollution. If necessary, replace the hydraulic oil and filter element.
Calibrate the bending angle and positioning size of the equipment, and adjust the deviation to ensure the processing accuracy.
Check the operation of the servo motor, hydraulic pump and clamping cylinder, and eliminate abnormal noise and oil leakage.


7.3 Monthly Maintenance (Once a Month)


Conduct a comprehensive inspection of the electrical system, including the PLC controller, servo driver, touch screen, sensor, etc., check the wiring for aging or damage, and replace the damaged wires in time.
Perform lubrication maintenance on all transmission mechanisms, replace the lubricating oil or grease that has deteriorated or exceeded the service life, and adjust the tightness of the chain and belt.
Check the sealing performance of the hydraulic system and pneumatic system, replace the aging sealing ring and oil seal, and eliminate oil leakage and air leakage faults.
Calibrate the pressure gauge, temperature sensor and other measuring instruments of the equipment to ensure the accuracy of measurement data.
Conduct a comprehensive test run of the equipment, check the operation status of each system, and deal with potential faults in advance.


7.4 Annual Maintenance (Once a Year)


Conduct a comprehensive disassembly and inspection of the equipment, check the wear of key components such as frame, bending shaft, bearing, and carry out repair or replacement according to the wear degree.
Replace all hydraulic oil, lubricating oil, filter element and sealing parts of the equipment, and clean the hydraulic oil tank and lubrication system.
Conduct a comprehensive calibration of the control system, update the system program if necessary, and optimize the bending parameters.
Conduct a safety performance evaluation of the equipment, including safety protection device, grounding system, overload protection, etc., to ensure that the equipment meets the safety standards.
After the annual maintenance is completed, conduct a comprehensive test run and acceptance, and record the maintenance content and acceptance results in the equipment file.


8. Troubleshooting of Common Faults

8.1 Inaccurate Bending Angle


Fault Causes: Incorrect springback compensation parameter setting, wear or deformation of bending die, loose positioning baffle, unstable air pressure/hydraulic pressure, damage of angle sensor.
Solutions: Readjust the springback compensation value according to the trial bending results; replace the worn or deformed bending die; tighten the positioning baffle and recalibrate the positioning size; check the air compressor/hydraulic pump to stabilize the pressure; replace the damaged angle sensor and recalibrate.


8.2 Aluminium Bar Deformation or Scratches During Bending


Fault Causes: Improper clamping pressure, burrs or wear on the die and clamping block, unqualified aluminium bar material, misalignment of bending point.
Solutions: Adjust the clamping pressure to an appropriate value; polish or replace the die and clamping block with burrs or wear; replace qualified aluminium bars; recalibrate the bending point position to ensure alignment with the die center.


8.3 Clamping Mechanism Fails to Clamp or Loosen


Fault Causes: Insufficient air pressure/hydraulic pressure, blockage of air pipe/hydraulic pipe, damage of clamping cylinder, failure of solenoid valve, loose circuit connection.
Solutions: Adjust the air pressure/hydraulic pressure to the normal range; clean the blocked pipeline; replace the damaged clamping cylinder; check and replace the faulty solenoid valve; tighten the loose circuit connector.


8.4 Equipment Abnormal Noise or Vibration


Fault Causes: Insufficient lubrication of transmission parts, loose fastening bolts, wear or damage of bearing and gear, unbalanced bending die, overload operation.
Solutions: Add lubricating oil or grease to the transmission parts; tighten all loose fastening bolts; replace the worn bearing and gear; recalibrate the balance of the bending die; reduce the processing load to avoid overload operation.


8.5 Hydraulic System Oil Leakage


Fault Causes: Aging or damage of sealing ring, loose joint of hydraulic pipe, crack of hydraulic oil tank, damage of hydraulic pump shaft seal.
Solutions: Replace the aging sealing ring; tighten the loose hydraulic pipe joint; weld or replace the cracked hydraulic oil tank; replace the damaged hydraulic pump shaft seal.


8.6 Control System Failure (Touch Screen No Display, Parameter Cannot Be Set)


Fault Causes: Power supply abnormality, loose connection of control line, damage of touch screen or PLC controller, system program error.
Solutions: Check the power supply and restore normal power supply; tighten the loose control line connector; replace the damaged touch screen or PLC controller; restart the system or reload the program to restore the normal operation of the control system.


9. Storage and Transportation of Equipment

9.1 Equipment Storage


The equipment should be stored in a dry, ventilated, dust-free and non-corrosive gas environment, away from heat sources, direct sunlight and rain.
Before storage, clean the equipment thoroughly, apply anti-rust oil on all metal parts and die, cover the equipment with a dust cover, and block the hydraulic pipe and air pipe interface to prevent dust and impurities from entering.
The equipment should be placed flat on a solid ground, and the support points should be set according to the requirements to avoid deformation of the frame. Regular inspection should be carried out during storage, and anti-rust and moisture-proof treatment should be done well.


9.2 Equipment Transportation


The equipment transportation should be carried out by a professional logistics company, and the transportation vehicle should have a fixed device to prevent the equipment from shaking or colliding during transportation.
Before transportation, fix all movable parts of the equipment (such as bending die, clamping cylinder, roller table) with fixtures, remove the easily damaged parts (such as touch screen, sensor) and pack them separately for transportation.
During loading and unloading, use a forklift or crane that meets the lifting requirements, and operate in accordance with the hoisting specifications to avoid impact or tilting of the equipment. The lifting point should be selected at the designated position of the equipment frame.
During transportation, cover the equipment with a rainproof and dustproof cloth to prevent rain, snow and dust from eroding the equipment.


10. Supplementary Provisions


This manual is the basic operation standard of the Aluminium Bar Bending Machine, and the operator shall strictly abide by it. If there is any conflict with the special instructions of the equipment manufacturer, the manufacturer's instructions shall prevail.
The enterprise shall formulate corresponding operation management system and maintenance system according to this manual, and assign special personnel to be responsible for the management and maintenance of the equipment.
Any modification, transformation or upgrade of the equipment must be approved by the equipment manufacturer or professional technical personnel, and shall not be carried out without authorization.
The operator shall be responsible for the equipment damage and personal safety accidents caused by violation of this manual.
This manual shall be kept properly, and the lost or damaged manual shall be reported to the equipment management department in time for replacement. The technical department of the enterprise is responsible for the interpretation and revision of this manual.

Glass Coating: Advanced Materials, Technological Innovations and Industrial Applications

In the contemporary field of material engineering and surface treatment, glass coating represents a high‑tech solution that endows ordinary glass substrates with additional functionalities and performance improvements. As an indispensable surface modification technology, glass coating has been widely used in construction, transportation, photovoltaics, home appliances, medical care, electronic displays and other fields. It not only enhances the physical and chemical stability of glass, but also creates intelligent, energy‑saving and environment‑friendly material properties for modern industrial products. This article systematically expounds the definition, classification, core properties, preparation processes, application scenarios and development trends of glass coating, demonstrating its important value in the global manufacturing and material industries.

1. Concept and Basic Principles of Glass Coating

Glass coating refers to a thin functional layer formed on the surface of glass through physical deposition, chemical reaction, spraying, curing and other processes. This layer is closely combined with the glass substrate at the molecular or atomic level, which can change the surface characteristics of glass without affecting its basic light transmittance and shape. The core principle of glass coating is to use the structural characteristics and chemical properties of coating materials to isolate the glass from external erosion, adjust light transmittance, reflect heat, resist friction and prevent pollution, so as to achieve the purpose of protection, beauty and functional expansion.

Ordinary glass has disadvantages such as fragility, easy scratching, easy adhesion of dirt, poor thermal insulation and easy weathering. After professional coating treatment, it can obtain superhydrophobicity, high hardness, corrosion resistance, UV resistance, infrared reflection, self‑cleaning and other characteristics, which greatly expands the application boundary of glass products.

2. Main Classification of Glass Coating

According to functional characteristics, application scenarios and material composition, glass coatings can be divided into the following categories, each with unique technical advantages and applicable fields.

2.1 Protective Glass Coating

Protective coating is the most widely used type of glass coating, mainly used to improve the surface strength and durability of glass. It includes anti‑scratch coating, anti‑collision coating, waterproof coating, acid and alkali resistant coating, etc. This kind of coating usually uses nano‑silica, nano‑titanium dioxide, polymer resin and other materials, which can form a high‑hardness transparent protective layer on the glass surface, effectively resist daily scratches, chemical corrosion and weathering damage, and extend the service life of glass.

2.2 Energy‑Saving and Thermal Insulation Coating

Energy‑saving coating is a key technology in the field of architectural glass and automotive glass. It uses metal oxide materials such as indium tin oxide (ITO) and low‑emissivity (Low‑E) materials to selectively reflect infrared and ultraviolet rays while ensuring high light transmittance. This kind of coating can block outdoor heat in summer and reduce indoor heat loss in winter, so as to achieve the effect of building energy conservation and interior comfort.

2.3 Self‑Cleaning and Antifouling Coating

Self‑cleaning glass coating is divided into photocatalytic type and hydrophobic type. The photocatalytic self‑cleaning coating uses nano‑titanium dioxide materials. Under the action of light, it can decompose organic dirt attached to the glass surface and make it easy to be washed away by rain. The hydrophobic self‑cleaning coating forms a lotus‑leaf‑like bionic surface, making water droplets form spherical shapes and slide off quickly, taking away dust and stains without leaving water marks. It is widely used in curtain wall glass, automotive glass and solar photovoltaic glass.

2.4 Anti‑Glare and Anti‑Reflection Coating

Anti‑reflection (AR) coating and anti‑glare (AG) coating are mainly used in electronic display screens, instrument panels, automotive central control screens and optical equipment. They can reduce light reflection, improve light transmittance, make the screen display clearer, reduce visual fatigue and avoid light pollution caused by reflection.

2.5 Functional Composite Coating

With the development of material technology, composite glass coating with multiple functions has gradually become the mainstream. For example, a coating can simultaneously have thermal insulation, self‑cleaning, anti‑UV and anti‑scratch functions, meeting the high‑standard needs of high‑end industries.

3. Core Performance Characteristics of High‑Quality Glass Coating

High‑performance glass coating has excellent physical and chemical indicators, which are the key to distinguishing ordinary treatment and professional coating.

3.1 High Hardness and Wear Resistance

Professional glass coating can reach a hardness of 9H or above, which can resist daily friction, scraping and hard object impact, and is not easy to produce scratches and wear marks.

3.2 Excellent Light Transmittance

High‑quality coating maintains high transparency, does not affect the original light transmittance of the glass, and does not produce yellowing, fogging and discoloration.

3.3 Strong Weather Resistance

It can adapt to extreme environments such as high temperature, low temperature, humidity and ultraviolet radiation, and the coating does not fall off, crack or degrade for a long time.

3.4 Good Adhesion

The coating is closely combined with the glass substrate, not easy to peel off, not easy to fall off, and has long‑term stability.

3.5 Environmental Protection and Non‑Toxic

Modern glass coating materials meet environmental protection standards, do not contain harmful substances, and are safe for humans and the environment.

4. Common Preparation Processes of Glass Coating

The production process of glass coating directly determines the uniformity, firmness and service life of the coating. The mainstream processes in the industry include the following types:

4.1 Magnetron Sputtering Coating

A physical vapor deposition (PVD) technology, which forms a uniform and dense film on the glass surface under vacuum conditions. It is mostly used in the production of Low‑E glass, AR glass and automotive functional glass, with high precision and good film quality.

4.2 Chemical Vapor Deposition (CVD)

Using chemical reaction to generate film‑forming substances and deposit them on the glass surface, it is suitable for large‑scale continuous production of architectural glass.

4.3 Spray Coating and Curing

Using nano‑ceramic coating or polymer coating materials, it is formed on the glass surface by spraying, wiping and high‑temperature curing. It is suitable for post‑processing of finished glass products, such as automotive glass coating, architectural glass renovation, etc.

4.4 Dip Coating and Roller Coating

Suitable for industrial mass production, with high efficiency and low cost, used for surface protective treatment of ordinary glass.

5. Main Application Fields of Glass Coating

Glass coating technology has penetrated into all aspects of modern industry and life, becoming an indispensable supporting technology.

5.1 Architectural Glass

Curtain wall glass, doors and windows glass use Low‑E coating, self‑cleaning coating and thermal insulation coating to achieve building energy conservation, environmental protection and beauty.

5.2 Automotive Glass

Automotive front windshield, side window glass use hydrophobic coating, thermal insulation coating, anti‑UV coating to improve driving safety and comfort.

5.3 Photovoltaic Solar Glass

Solar panels use anti‑reflection coating and self‑cleaning coating to improve light transmittance, reduce dust retention and increase power generation efficiency.

5.4 Electronic and Home Appliance Glass

Mobile phone screens, TV displays, refrigerator panels, air conditioner glass panels use anti‑scratch, anti‑fingerprint and anti‑reflection coating.

5.5 Medical and Laboratory Glass

Medical equipment glass and laboratory glass use antibacterial coating and corrosion‑resistant coating to meet the requirements of hygiene and safety.

5.6 Traffic and Public Facilities

Street lamp covers, subway station glass, airport glass use self‑cleaning and anti‑vandalism coating to reduce maintenance costs.

6. Development Trend of Glass Coating Technology

With the advancement of science and technology and the improvement of global environmental protection requirements, glass coating is developing towards intelligence, multi‑functionality, green and high efficiency.

6.1 Intelligent and Responsive Coating

Electrochromic, thermochromic and photochromic intelligent glass coatings will realize automatic adjustment of light and heat according to environmental changes.

6.2 Green and Environmentally Friendly Materials

Water‑based, solvent‑free and pollution‑free coating materials will replace traditional chemical coatings, complying with global low‑carbon and environmental protection trends.

6.3 High‑Efficiency and Large‑Scale Production

New coating equipment and processes will achieve higher efficiency, lower cost and larger‑scale production.

6.4 Multi‑Functional Composite Integration

A single coating will integrate multiple functions such as thermal insulation, self‑cleaning, antibiosis, wear resistance and energy saving.

7. Conclusion

As an advanced surface treatment technology, glass coating plays an important role in improving material performance, expanding product functions and promoting industrial upgrading. From architectural energy conservation to automotive safety, from electronic displays to photovoltaic power generation, glass coating provides reliable technical support for the development of modern industries. With the continuous innovation of material science and manufacturing technology, glass coating will show greater application potential and market value in the future, and become one of the core driving forces for the development of the functional material industry.